Professional Wireless Creator Microphone
DiipX ClipAir
Model C20
Clip on lightly. Keep the voice steady and upfront.
A wireless lavalier microphone system designed for livestreams, short videos, interviews and course recording. Wake from the case, capture two speakers, and adjust visually on the receiver so creators can stay focused on expression.
The highlights, at a glance.
Studio-grade sound
A recording studio, clipped to your collar.
The 4-mic cardioid array sits right at the source, recording through a 48 kHz / 24-bit pipeline. AI noise reduction holds back the room, while auto gain and clip protection catch every sudden peak — from a noisy street to a quiet study, the voice comes back clean, solid and ready to publish.
48 kHz / 24-bitHigh-resolution pipeline
20 Hz – 20 kHzFull-range frequency response
4-MicCardioid pickup · adaptive beamforming
Lightweight wear
Close to the source without interrupting the shot.
A rounded body with a magnet plate and a hidden clip attaches to a collar, shirt or bag strap. The pickup sits closer to the mouth, so the voice stays present while you move, present or appear on camera.
Open and record
Take it from the case and start creating.
Transmitters, receiver and charging case are stored together with a clear workflow. Before a quick interview, outdoor pickup shot or livestream opening, there is less gear to double-check.
Multi-device connection
Phones, computers and cameras with less switching friction.
The receiver connects to common creator devices for pre-edit recording, online courses, desktop livestreaming and mobile interviews. When switching devices, the audio chain stays simple and controllable.
Visual receiver
See left/right channels and volume status while recording.
The receiver screen gathers battery, channel and gain information, while the knob and ports stay ready for quick on-site adjustment. Connected to a camera, phone or computer, creators can judge sound reliability faster.
- Two-person
- Two transmitters suit interviews, podcasts and two-person explanations.
- Low noise
- Noise reduction handles wind, keyboard sound and room background noise.
- Steady
- Automatic gain helps sudden volume changes feel smoother.
Full kit storage
Keep the everyday pieces in one rhythm.
Two transmitters, the receiver and charging case form a complete workflow. Check status before recording, return everything to charge afterward, and remove small chores from daily content production.
Timecode sync
Built-in timecode keeps multi-camera footage aligned.
The transmitter stamps timecode while recording, and the receiver takes timecode in and out, with under one frame of drift across 24 hours. Multi-camera and multi-device clips line up in one step in post, with no manual syncing.
Onboard backup recording
32-bit float recording keeps a safety track for the moments that matter.
The transmitter records a local backup with 32-bit float and auto-record, so there's a clean track even if the wireless link is disrupted. After the shoot, export everything in one pass over the case and USB-C, or manage the files in DiipTools.
Use cases
One microphone kit for mainstream mobile creation.
Technology and specs
Core specs for mobile creation.
Acoustics
Mic arrayFour-MEMS omnidirectional array with adaptive beamforming and a cardioid pattern that tracks the voice
Recording format48 kHz / 24-bit end-to-end; 20 Hz – 20 kHz frequency response
Max SPL & SNRMax SPL target ≥110 dB SPL without clipping; SNR target ≥70 dB(A)
Audio processingThree-level AI noise reduction, auto gain, low cut and low-latency monitoring
Pickup capabilityNatural voice / AI noise reduction / AI directional, with spatial-audio capture
Recording & sync
Onboard recording32-bit float / 24-bit backup recording with auto-record; one-pass export over the case and USB-C
TimecodeBuilt-in timecode 23.98–60 fps, under 1 frame of drift over 24 h, with input / output
Channels & monitoring
Output channelsStereo split (TX1 left / TX2 right), mono mix, safety track (-6 dB backup); full mix in 4-TX mode
Latency & monitoringEnd-to-end target ≤25 ms, monitoring ≤40 ms; 3.5 mm monitor jack with independent volume
Wireless & range
Frequency band2.4 GHz ISM with adaptive frequency hopping
Transmission rangeUp to about 200 m, depending on obstacles, electromagnetic interference and connected devices
Interference resistanceStable transmission within ~50 m in crowded Wi-Fi / Bluetooth environments
Multi-TX / multi-RXReceiver manages up to 4 transmitters; a transmitter can multicast to up to 4 receivers; channel sync target ≤1 ms
Connectivity & expansion
Product formA 2-TX + 1-RX wireless lavalier system with charging case; expandable to 4 TX + 1 RX or 2 TX + 4 RX with add-on units
Mounting & weightMagnetic and hidden-clip mounting; transmitter ≤20 g (with clip); two windscreens included
ConnectionUSB-C / Lightning adapter / 3.5 mm line output
Camera compatibility3.5 mm output matched to popular Sony / Canon / Nikon / Fujifilm / Panasonic bodies
Compatible systemsiOS, Android, Windows, macOS and camera input
Display & control
DisplayColor screen shows each TX/RX battery, channel, gain and live channel levels (adapts to 2–4 channels)
Physical controlsReceiver dial adjusts gain, press to switch, hold to lock; transmitter multi-function key with one-tap mute and LED status
Companion softwareDiipTools (PC / mobile) for setup, tuning and OTA updates; core recording works offline
Power & general
ModelC20
Battery lifeAbout 8 h per transmitter and 9 h on the receiver (targets); the case tops up the whole kit
Battery400 mAh each in transmitter / receiver; 2000 mAh case with USB-C input and charge-while-use
Operating temperature-10°C to 45°C operating, -20°C to 60°C storage
Certification & safetyLaunch covers China SRRC, EU CE-RED, US FCC, Japan TELEC and more; battery passes UN38.3
The following information is for website display and purchase conversations. Final production specifications apply.
Box contents
Transmitters, receiver, charging case, cables, wind muffs, manual and warranty card. Exact accessories depend on the sales version.
After-sales support
Supports DiipX ID device binding, order lookup, warranty submission and enterprise bulk purchase consultation. Enterprise customers can confirm connectors and spare parts by project.
Go to supportDownloads
Download the DiipX ClipAir (C20) manual or use DiipTools for setup, tuning and firmware upgrades.
FAQ
Frequently asked questions.
Can it connect to phones and cameras?
Yes. Exact cables, adapters and interface capabilities depend on the sales version.
Does it support two-person recording?
DiipX ClipAir (C20) is designed with two transmitters for interviews, two-person courses and multi-speaker explanations.
How do I request an invoice or warranty service?
After signing in with a DiipX ID, submit a service ticket and bind the device serial number in Account Center.